MotorsAvailable, depending upon the model: - with three phase motors in 4 or 6 poles. - with three phase two speed motors 4/8 or 6/12 poles.All the motors are IP55, Class F insulation.Electrical supplies: Three phase 220-240/380-415-50/60* Hz up to 3 kW. (*Check Easyvent for 60Hz available models) - Three phase 380-415V-50Hz, for higher power motors and two speed motors. (See characteristics chart).Additional InformationStandard air direction: form (A) configuration (Motor over Impeller).For horitzontal airflow installation.On requestSingle phase motors 230-50Hz up to 2,2kW.Motors with PTC.For horitzontal airflow installation.ATEX CGTATEX versions available for three phase models. For ambient working temperatures from -20ºC to +40ºC.-ATEX Flameproof-GasIn standard ATEX version flameproof motors are without thermal protection.If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.II 2G Ex d IIB T4II 2G Ex d IIB+H2 T4 (with Ex d IIC T4 motor)-ATEX Increased safety- GasII 2G Ex e II T3-ATEX- DustIn standard ATEX version, ATEX motors for dust are without thermal protection.If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.Suspended flammable particles and nonconductive dust:II 3D Ex tc IIIB T125ºCConductive dust:II 3D Ex tc IIIC T125ºC (with IP65 motor)To select CGT ATEX refer to performance curves for CHGT or Easyvent.Note electrical data may vary for ATEX motors.