Base manufactured from galvanized sheet steel.Cowl manufactured from spun aluminium. The impellers for models 315 to 400 are manufactured from one piece injection moulded plastic, reinforced with chemical anchored fibreglass for additional strength. Models 450 to 1000 incorporate separate plastic blades locked within a die cast aluminium hub.Available, depending upon the model, with single or three phase motors in 4, 6, 8 or 4/8 poles.MotorsAll motors are IP65 (1) Class F (2) with thermal protection (3) and ball bearings greased for life.Electrical supply:-Single phase 230V-50Hz (Capacitor located inside the wiring terminal box).-Three phase 400V-50Hz.(See characteristics chart).All single phase models are speed controllable by voltage except HCTB/4- 560, HCTB/4-630.All three phase models are speed controllable by autotransformer, except models HCTT/4- 560, HCTT/4-630, Ø 710 to 1000.Three phase models, 1 speed motor, are speed controllable by inverter.(1) 800 to 1000 models are IP55.(2) Air stream temperature limits -40ºC to +70ºC (except models 800 to 1000 suitable for usage in environments from -20ºC to 40ºC).(3) 800 to 1000 models are not equipped with thermal protection.AplicationsIndustrial process ventilation, agricultural facilities, swimming pools and data centers. HCTT ATEXATEX versions available for 3 phase models. For ambient working temperatures from -20ºC to +40ºC.Motors IP55, class F.- ATEX Flameproof - Gas:In standard ATEX version flameproof motors are without thermal protection.If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.Only available for 800 to 1000 modelsII 2G Ex d IIB T4II 2G Ex d IIB+H2 T4 (with motor Ex d IIC T4)- ATEX Increased safety – Gas:II 2G Ex e II T3- ATEX - Dust:In standard ATEX version, ATEX motors for dust are without thermal protection.If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.Only available for 800 to 1000 modelsSuspended flammable particles and non-conductive dust:II 3D Ex tc IIIB T125ºCConductive dust:II 3D Ex tc IIIC T125ºC (with IP65 motor)To select HXTT ATEX refer to performance data or EASYVENT.Note electrical data may vary for ATEX motors.
