High efficient heat recovery units up to 88% with rotary wheel, plug-fans with backward curved blades and EC external-rotor motor. Pre-configured control system for easy start-up. The casing is made of 50 mm, self-supporting double skinned panels (mineral wool, 40 kg/m3, thermal conductivity 0.037 W/ mK). The outer skin is made from coated steel (RAL7024) with a high resistance against corrosion (class: RC3) and UV light (class: RUV3) according to EN 10169 and the inner skin is made from galvanised steel. Support feet are made from 3 mm, RAL9011 coated, 100 mm height (except RHE 6000 to 10000 models, which are base-mounted), with possibility to fit anti-vibration mounts or leveling feet (as accessories). Easy access to all components via large hinged front doors. Circular inlet and discharge connection flanges with EPDM rubber seal strip, VELODUCT© tightness class D up to size 3500 HD, rectangular connections for the sizes 4500 VD, 6000, 8000, 10000 and 15000. Fan / Motor Plug-fan with backward curved blades, external rotor EC motor with maintenance free ball bearings and permanent lubrication, with integrated electronic protection (lockedrotor, phase failure, under-voltage, overtemperature, short-circuit). Protection IP54, Class B. (RHE-8000, 10000 and 15000 models, Class F) Application Public buildings, offices, stores, schools, restaurants. Range Versions: • horizontal discharge HD • vertical discharge VD • horizontal discharge for outdoor installation HD OI Sizes: 700 m3/h,1300 m3/h, 1900 m3/h, 2500 m3/h, 3500 m3/h,4500 m3/h, 6000 m3/h, 8000 m3/h, 10000 m3/h and 15.000 m3/h. Models: • RHE D: without additional heater • RHE DI: with built-in electric post-heating • RHE DC: with built-in hot water coil • RHE DFR: with 2-row coil built-in reversible hot/chilled water integrated (the cold water version coil only for the models HD). • RHE DFR4R: with 4-row coil built-in reversible hot/chilled water integrated (for models 6000, 8000, 10000 and 15000) • RHE DC/DF: with 2 independent integrated coils (chilled water and hot water). • RHE DX: direct expansion integrated coil (only for horizontal discharge, HD versions, except for models 15000). Control (Pulg&Play): VAV- variable air volume Fan speed can be adjusted with a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2, temperature or humidity sensor (accessories). CAV - constant air volume Manual pre-setting of 2 working points. The fans are controlled separately. COP - constant pressure Constant pressure measured by an external sensor (accessory).
